Mirafi authorized dealer — trusted supplier

South Carolina SCDOT - Secion 203 - Uniaxial Geogrid - U4 - 12' x 150' Roll - 5XT

Name: South Carolina SCDOT - Secion 203 - Uniaxial Geogrid - U4 - 12' x 150' Roll - 5XT
Brand: Mirafi
SKU: MIRAFI-5XT-12X150
Price: 1315.59 USD
Availability: InStock

$1,315.59

FREE SHIPPING

SKU MIRAFI-5XT-12X150

Quantity

Roll Coverage Calculator

Total Area Needed (sq ft)

Waste (%)

Rolls Needed

--rolls

This product: 1800 sq ft / roll

Geogrid Spec Finder Find geogrid by tensile strength & LTDS →

Soil Reinforcement Geogrid

Miragrid XT is a high-strength geogrid engineered for soil reinforcement in walls, slopes, and embankments.

This knitted polyester geogrid, protected with a durable coating, develops strong soil interlock to reinforce mechanically stabilized earth (MSE) walls and reinforced soil slopes. The XT range steps up in tensile strength to match wall height and load.

Miragrid is specified by geotechnical designers for retaining structures and steepened slopes, where its long-term strength and low creep keep reinforced soil masses stable for the life of the structure.

Square Feet / Roll: 1,800
Weight: 145 lbs
Geogrid Specifications: Download Miragrid 5XT Specification Sheet

Looking for a smaller roll size? We offer retaining wall geogrid in both 4' and 6' widths in addition to 12'. View Selection >

South Carolina SCDOT Note:

This fabric meets the specifications as outlined in the SCDOT requirements for the described material use. It is the purchaser's responsibility to verify this information independently. For further specification information please view the TENCATE / Solmax DOT Chart >

Why Choose Miragrid 5XT?

5 reasons engineers specify Miragrid XT-series over generic uniaxial geogrids

Mid-Range Uniaxial Tensile for Standard Retaining Wall Applications

Provides the tensile strength required for mid-height retaining walls and standard slope reinforcement without the cost of heavier grades.

High Junction Efficiency Throughout the Reinforced Zone

Junction strength ensures the full geogrid tensile capacity is mobilized at each layer connection — critical for reliable reinforced soil structure performance.

DOT Pre-Approved for Wall & Slope Reinforcement Applications

Miragrid 5XT appears on state DOT qualified products lists for retaining wall and reinforced slope applications in multiple states.

USA-Made, BABA Eligible

Manufactured in Georgia — qualifies for Build America / Buy America requirements on federally funded retaining wall and slope projects.

40+ Years of Miragrid XT Performance on DOT Projects

The Miragrid XT series is backed by decades of documented field performance on state DOT and private retaining wall projects.

Frequently Asked Questions

This Product is Stocked in the California and Georgia Distribution Centers Only.

FREE SHIPPING

Require a written quote?
Request Online >

Questions? Call (800) 748-5647

PRODUCT SUMMARY

High long-term design strengths (LTDS): Miragrid® geogrids have more than 220,000 hours of tension creep testing performed at an independent test laboratory.
Credible: Dependable long term strength assured.
Cost effective: Creep resistant polyester fibers provide higher allowable tensile strength, minimizing the required number of geogrid layers. Wide rolls significantly reducing placement time, lowering cost.
Light weight: Easy to handle and no sharp edges.
Flexible, tough: Minimizes movement of soil structure.
Strength: Miragrid® geogrids provide the widest strength range, and are the highest strength geogrid material in the market today.

TenCate Miragrid® XT uniaxial geogrids function for:
- Soil Reinforcement

YOUR TRUSTED
MIRAFI SUPPLIER

We are an authorized Mirafi distributor.
We only sell genuine Mirafi geogrid. We never ship mislabeled overruns or "knock-offs".
You order Mirafi, we ship Mirafi. Even if a stock issue arises we never substitute for another brand without the customer's direct consent.
When you call, we answer. When you call Paramount Materials you get a live person quickly, ready to help with product or order questions. (M-F 5:00 am - 3:00 pm Pacific Time)

Fabric Shipping Time - Georgia Warehouse:

By default, Mirafi fabric orders ship from the Georgia warehouse where a full stock of the Mirafi fabric types are maintained. Most orders ship same day (M-F) if order is placed before 11:00 AM EST. Transit times displayed in the map are listed in business days, are approximate and are specific to the Mirafi fabric line. The day that the order is shipped is not counted as a transit day. Most Mirafi fabric rolls ship via LTL freight. For expedited shipping rates please call: (800) 748-5647

The transit times displayed on the map are for our free shipping option.

Fabric Shipping Time - Southern California Warehouse:

Note: By default, orders ship from the Georgia warehouse with the standard transit times shown above. If you would like your order to ship from the Southern California warehouse (Mira Loma) you must first fill out a stock check request. Orders can also be picked up at this warehouse location if preferred. Southern California warehouse orders must be placed over the phone.

Most Mirafi fabric California warehouse orders ship same day (M-F) if order is placed before 11:00 AM EST. Transit times displayed in the map are listed in business days, are approximate and are specific to the Mirafi fabric line. The day that the order is shipped is not counted as a transit day. Most Mirafi fabric rolls ship via LTL freight. For expedited shipping rates please call: (800) 748-5647

The transit times displayed on the map are for our free shipping option.

PRODUCT INFORMATION

TENCATE MIRAGRID® XT UNIAXIAL GEOGRIDS:

TenCate Miragrid® XT uniaxial geogrids are high performance woven polyester and polymer-coated geogrids used for soil reinforcement. TenCate Miragrid® XT uniaxial geogrids are used in Mechanically Stabilized Earth applications including internally reinforced walls, segmental retaining walls (SRW's), and steepend slopes. TenCate Miragrid® XT uniaxial geogrids provide high, long-term design strengths (LTDS) and excellent soil interaction. TenCate Miragrid® XT uniaxial geogrids are constructed of high tenacity, high molecular weight, woven polyester to deliver long-term performance.

The Difference TenCate Miragrid® XT uniaxial geogrids make:

- Flexible and durable
- Excellent creep resistance
- High long-term design strengths
- Lightweight and easily handled
- Cost effective
- Custom fabricated
- System Solutions:

Mechanically Stabilized Earth

- Steepened Slopes: Vegetated and Wrapped Faced
- Walls: Permanent and Temporary
- Segmented Retaining Walls
- Void Spanning
- Veneer Reinforcement
- Soil Reinforcement
- Landfills

Downloads:

Product Description Sheet (MARV)

2XT Product Description Sheet

2XT Tri-fold

Engineered Structures Brochure

Mechanically Stabilized Earth Line Card

NTPEP Report REGEO-2011-01-001

NTPEP Report REGEO-2015-01-002

Technical Data Sheet PDF (MARV):

Case Studies:

How Miragrid 5XT Is Used

Waste Management was needed to close a section of the Elk River Landfill, Phase 15 Cell, and apply a final geomembrane cover. To reduce the intrusion of the western landfill toe into a buffer area, the Landfill Operator or Owner needed a steep 40-foot high landfill side slope.

Gale Tec Engineering (USA) prepared a Value Engineering Change Proposal, or VECP, for the Contractor that would reduce the original project costs by effecting a geosynthetic reinforcement 1H:1V landfill side slope without hindering fundamental performances and characteristics of the project.

The project involved the construction of a steep 1H:1V landfill western slope at 40-feet above grade and the slope needed to support a new access road at the top of the landfill.

Miragrid 5XT Installation

The Design

A soil reinforcement area defined by a slope of 1H:1V determined for the project. Due to both internal and global stability issues, the 1H: 1V slopes were designed and constructed with soil reinforcement.

A limit equilibrium computer program was brought in to assess the stability of circular and wedge failures within the reinforced slope sections. The global failures were designed based on the “target” factors of safety of 1.1 - 1.3 for temporary conditions and 1.4 – 1.5 for long-term conditions. The computer analysis performed searches to identify the most crucial failure surfaces as related to factors of safety. To provide both long-term and temporary stability to the slopes, geosynthetic fortifying layers were embedded into the newly constructed perimeter berm using granular fill.

Installation

The main reinforcement was achieved by installing TenCate Miragrid® 5XT and 7XT followed by installing Miragrid® 2XT as a secondary geogrid at 1-foot intervals between the main reinforcement layers. The main embedment lengths were 32 feet at the bottom of the berm and 28 feet at the top. For the reinforcement to work properly, the geogrid lengths needed to lie flat and taut. To make this happen, the fill was shoved out over the grid panels.

Erosion at the face of the reinforced slope was a major concern due to infiltration during storms. These storms could generate sloughs and slides in the near future. The following steps were applied to improve performance - 1 foot of topsoil, an erosion mat that was wrapped around the face, a MnDOT 50B seed mix with 12-12-12 slow-release fertilizer.

Geogrid Installation at Jobsite