Skip to content
Free Shipping on All Orders
Free Shipping on All Orders
 
Miragrid 2XT Geogrid

Mirafi authorized dealer — trusted supplier

Pennsylvania PennDOT - 738.2 - Uniaxial Geogrid Reinforcement - 12' x 150' Roll - 2XT

$1,301.64


FREE SHIPPING
SKU MIRAFI-2XT-12X150


Roll Coverage Calculator
Rolls Needed
--rolls
This product: 1800 sq ft / roll
Geogrid Spec Finder Find geogrid by tensile strength & LTDS →
Soil Reinforcement Geogrid

Miragrid XT is a high-strength geogrid engineered for soil reinforcement in walls, slopes, and embankments.

This knitted polyester geogrid, protected with a durable coating, develops strong soil interlock to reinforce mechanically stabilized earth (MSE) walls and reinforced soil slopes. The XT range steps up in tensile strength to match wall height and load.

Miragrid is specified by geotechnical designers for retaining structures and steepened slopes, where its long-term strength and low creep keep reinforced soil masses stable for the life of the structure.

Square Feet / Roll: 1,800
Weight: 132 lbs
Geogrid Specifications:  Download Miragrid 2XT Specification Sheet


Looking for a smaller roll size? We offer retaining wall geogrid in both 4' and 6' widths in addition to 12'. View Selection > 

Pennsylvania PennDOT Note:
This fabric meets the specifications as outlined in the PennDOT requirements for the described material use. It is the purchaser's responsibility to verify this information independently. For further specification information please view the TENCATE / Solmax DOT Chart >
Mirafi Assistant
Questions? (800) 748‑5647
Answers limited to Mirafi product info

Why Choose Miragrid 2XT?

5 reasons engineers specify Miragrid XT-series over generic uniaxial geogrids for retaining walls

Uniaxial Design Concentrates Tensile in the Critical Direction

Single-direction tensile strength optimized for retaining wall panel reinforcement where load acts primarily in one direction — more efficient than biaxial alternatives for wall applications.

High Junction Efficiency for Full Load Transfer

Junction strength efficiency ensures the full tensile capacity of each geogrid layer is mobilized at each connection point — critical for reinforced soil wall performance.

DOT Pre-Approved on Multiple State QPLs

Miragrid 2XT appears on state DOT qualified products lists for retaining wall geogrid applications — generic alternatives typically cannot substitute without engineering review.

USA-Made, BABA Eligible

Manufactured in Georgia — qualifies for Build America / Buy America requirements on federally funded retaining wall projects.

40+ Years of Miragrid XT Retaining Wall Performance History

The Miragrid XT series has been specified on DOT and private retaining wall projects for over four decades with documented field performance that no generic can match.

Frequently Asked Questions

This Product is Stocked in the California and Georgia Distribution Centers Only.

FREE SHIPPING
     
 Require a written quote?
Request Online >

 Questions? Call (800) 748-5647

PRODUCT SUMMARY

  • High long-term design strengths (LTDS): Miragrid® geogrids have more than 220,000 hours of tension creep testing performed at an independent test laboratory.
  • Credible: Dependable long term strength assured.
  • Cost effective: Creep resistant polyester fibers provide higher allowable tensile strength, minimizing the required number of geogrid layers. Wide rolls significantly reducing placement time, lowering cost.
  • Light weight: Easy to handle and no sharp edges.
  • Flexible, tough: Minimizes movement of soil structure.
  • Strength: Miragrid® geogrids provide the widest strength range, and are the highest strength geogrid material in the market today.

TenCate Miragrid® XT uniaxial geogrids function for:
- Soil Reinforcement

YOUR TRUSTED
MIRAFI SUPPLIER

  • We are an authorized Mirafi distributor.
  • We only sell genuine Mirafi geogrid. We never ship mislabeled overruns or "knock-offs".
  • You order Mirafi, we ship Mirafi. Even if a stock issue arises we never substitute for another brand without the customer's direct consent.
  • When you call, we answer. When you call Paramount Materials you get a live person quickly, ready to help with product or order questions. (M-F 5:00 am - 3:00 pm Pacific Time)

Fabric Shipping Time - Georgia Warehouse:

By default, Mirafi fabric orders ship from the Georgia warehouse where a full stock of the Mirafi fabric types are maintained. Most orders ship same day (M-F) if order is placed before 11:00 AM EST. Transit times displayed in the map are listed in business days, are approximate and are specific to the Mirafi fabric line. The day that the order is shipped is not counted as a transit day. Most Mirafi fabric rolls ship via LTL freight. For expedited shipping rates please call: (800) 748-5647

The transit times displayed on the map are for our free shipping option.

Fabric Shipping Time - Southern California Warehouse:

Note: By default, orders ship from the Georgia warehouse with the standard transit times shown above. If you would like your order to ship from the Southern California warehouse (Mira Loma) you must first fill out a stock check request. Orders can also be picked up at this warehouse location if preferred. Southern California warehouse orders must be placed over the phone.

Most Mirafi fabric California warehouse orders ship same day (M-F) if order is placed before 11:00 AM EST. Transit times displayed in the map are listed in business days, are approximate and are specific to the Mirafi fabric line. The day that the order is shipped is not counted as a transit day. Most Mirafi fabric rolls ship via LTL freight. For expedited shipping rates please call: (800) 748-5647

The transit times displayed on the map are for our free shipping option.

PRODUCT INFORMATION

TENCATE MIRAGRID® XT UNIAXIAL GEOGRIDS:

TenCate Miragrid® XT uniaxial geogrids are high performance woven polyester and polymer-coated geogrids used for soil reinforcement. TenCate Miragrid® XT uniaxial geogrids are used in Mechanically Stabilized Earth applications including internally reinforced walls, segmental retaining walls (SRW's), and steepend slopes. TenCate Miragrid® XT uniaxial geogrids provide high, long-term design strengths (LTDS) and excellent soil interaction. TenCate Miragrid® XT uniaxial geogrids are constructed of high tenacity, high molecular weight, woven polyester to deliver long-term performance.


The Difference TenCate Miragrid® XT uniaxial geogrids make:

- Flexible and durable
- Excellent creep resistance
- High long-term design strengths
- Lightweight and easily handled
- Cost effective
- Custom fabricated
- System Solutions:

Mechanically Stabilized Earth

- Steepened Slopes: Vegetated and Wrapped Faced
- Walls: Permanent and Temporary
- Segmented Retaining Walls
- Void Spanning
- Veneer Reinforcement
- Soil Reinforcement
- Landfills

Downloads:

 Product Description Sheet (MARV)

2XT Product Description Sheet

2XT Tri-fold

Engineered Structures Brochure

Mechanically Stabilized Earth Line Card

NTPEP Report REGEO-2011-01-001

NTPEP Report REGEO-2015-01-002

 

Technical Data Sheet PDF (MARV):

 

Case Studies:

What You Should Know About Miragrid 2XT

The call to action regarding this project was redeveloping a decommissioned quarry. The owners of the quarry were required to bring it back to a more natural state before it could be sold. On top of that, they discovered the quarry had accidentally infringed upon a regional parkland that sat next door to the quarry.  The owners of the quarry were required to bring this part of the property back to its original state before giving it back to the Park District.

The Design

Part of the project required the construction of  60’ - 70’ high 1:1 (H:V) slopes to hide the presence of the old quarry. The steepened slopes would be unstable without adding geosynthetic reinforcement to create a reinforced soil mass. The design for the reinforced steepened slope required placing geogrid reinforcement horizontally within layers of compacted fill. For both stability and safety on the slope, primary geogrid reinforcement with long-term design strength of 3,000 lbs/ft and 3,700 lbs/ft was needed. The design also required a biaxial (two axes) geogrid for secondary surface reinforcement of 1,000 lbs/ft. The faces of the completed slope were treated with erosion control measures to prevent surface erosion before permanent vegetation could be established.

Construction

The distributor of TenCate offered Miragrid® geogrids because of the lightweight, flexibility, and tough quality for easy installation during the slope's construction.

They used Miragrid® 7XT and 8XT as the first reinforcement and  Miragrid® 2XT as the secondary reinforcement.

Construction began in June 2009 with a deadline of October 15, 2009. This date would also be the start of the rainy season in Northern California. Due to easy installation using Miragrid® 2XT geogrids, the contractor was able to finish the project on time and under budget.

Performance

Using Miragrid® geogrids to construct the reinforced steepened slope (RSS) was a very economical way to bring the quarry back to a natural condition. Over 50,000 square yards of  Miragrid® geogrids performed perfectly for supporting the RSS.