Skip to content
Free Shipping on All Orders
Free Shipping on All Orders
 
Geogrid For Driveways

Mirafi authorized dealer — trusted supplier

Geogrid For Driveways

$1,516.30


FREE SHIPPING
SKU MIRAFI-BXG110-12.5X328


Roll Coverage Calculator
Rolls Needed
--rolls
This product: 4100 sq ft / roll
Geogrid Spec Finder Find geogrid by tensile strength & LTDS →
Base Reinforcement Geogrid

The Mirafi BXG-series is a biaxial geogrid built to reinforce aggregate bases and stabilize soft subgrade.

Made from punched-and-drawn polypropylene, these rigid geogrids confine aggregate through their apertures, spreading loads and reducing rutting over weak soils. They are used under roads, parking lots, and working platforms for base course reinforcement.

The BXG-series lets designers reduce aggregate thickness and extend service life, providing all-directional stiffness that keeps the base intact under repeated traffic loading.

Designed for use on driveways and roadways, this material is the ideal product for reinforcing paved or gravel driveways.

This geogrid is placed below the gravel during construction to limit side-to-side gravel movement and helps support long-term use road use. Many homeowners and construction professionals prefer biaxial geogrid over other types of geogrid because it provides strength in all lateral directions. Geogrid reduces costly maintenance and adds to the longevity of a project.
The geogrid is made from durable punched polypropylene plastic and can be easily rolled out for installation.

Square Feet / Roll: 4,100
Geogrid Specifications:  Download BXG110 Specification Sheet
Mirafi Assistant
Questions? (800) 748‑5647
Answers limited to Mirafi product info

Why Choose Mirafi Geogrid?

5 reasons engineers specify Mirafi geogrid over generic biaxial and uniaxial alternatives

Engineered Tensile Modulus — Not Just Nominal Strength

Mirafi geogrids provide high tensile strength at low strain — mobilizing reinforcement before significant deformation occurs, unlike generic geogrids that require rutting to engage.

Published ASTM D6637 Data for Design Confidence

Wide-width tensile, junction efficiency, and stiffness published per ASTM — providing the engineering data required for geogrid-reinforced road and stabilization design.

DOT Pre-Approved Across Multiple States

Mirafi biaxial and uniaxial geogrids appear on state DOT qualified products lists — generic alternatives frequently require engineering review before acceptance.

USA-Made, BABA Eligible

Manufactured in Georgia — qualifies for Build America / Buy America requirements on federally funded road and site development projects.

40+ Years of Geogrid Project Performance History

TenCate Mirafi geogrids have been used on road base, parking lot, and stabilization projects for over four decades with documented performance.

Frequently Asked Questions

This Product is Stocked in the California and Georgia Distribution Centers Only.

FREE SHIPPING
     
 Require a written quote?
Request Online >

 Questions? Call (800) 748-5647

PRODUCT SUMMARY

  • Reinforcement Strength: High tensile modulus properties per ASTM D6637 for base reinforcement applications. For structures with dynamic short-term loadings, Mirafi® BXG geogrids offer high strength at low strain and are designed for maximum bearing capacity and shear resistance.
  • True biaxial strengths: Mirafi ® BXG geogrids are biaxial grids that exhibit high tensile strength in both longitudinal and transverse directions, making them suitable for base course reinforcement and soil stabilization applications.
  • Durability: Superior damage resistance from moderate to severe stress installations.
  • Soil Interaction: Superior soil confinement resulting in greater load distribution. A combination of grid structure and polymers create optimum soil-grid interaction.
  • Seams: Panels can be sewn together in the factory or field, providing cross-roll direction strength to facilitate installation

YOUR TRUSTED
MIRAFI SUPPLIER

  • We are an authorized Mirafi distributor.
  • We only sell genuine Mirafi geogrid. We never ship mislabeled overruns or "knock-offs".
  • You order Mirafi, we ship Mirafi. Even if a stock issue arises we never substitute for another brand without the customer's direct consent.
  • When you call, we answer. When you call Paramount Materials you get a live person quickly, ready to help with product or order questions. (M-F 5:00 am - 3:00 pm Pacific Time)

Fabric Shipping Time - Georgia Warehouse:

By default, Mirafi fabric orders ship from the Georgia warehouse where a full stock of the Mirafi fabric types are maintained. Most orders ship same day (M-F) if order is placed before 11:00 AM EST. Transit times displayed in the map are listed in business days, are approximate and are specific to the Mirafi fabric line. The day that the order is shipped is not counted as a transit day. Most Mirafi fabric rolls ship via LTL freight. For expedited shipping rates please call: (800) 748-5647

The transit times displayed on the map are for our free shipping option.

Fabric Shipping Time - Southern California Warehouse:

Note: By default, orders ship from the Georgia warehouse with the standard transit times shown above. If you would like your order to ship from the Southern California warehouse (Mira Loma) you must first fill out a stock check request. Orders can also be picked up at this warehouse location if preferred. Southern California warehouse orders must be placed over the phone.

Most Mirafi fabric California warehouse orders ship same day (M-F) if order is placed before 11:00 AM EST. Transit times displayed in the map are listed in business days, are approximate and are specific to the Mirafi fabric line. The day that the order is shipped is not counted as a transit day. Most Mirafi fabric rolls ship via LTL freight. For expedited shipping rates please call: (800) 748-5647

The transit times displayed on the map are for our free shipping option.

PRODUCT INFORMATION  - TENCATE MIRAFI BXG GEOGRIDS:


APPLICATIONS

Mirafi BXG geogrids deliver strength, long-term performance, reliability and quick installation for base reinforcement for paved roads, construction haul roads, foundation reinforcement, working platforms on weak subgrades, and secondary reinforcement for soil retaining structures.

FUNCTIONS

Confinement - The ability of a geosynthetic to restrain lateral movement from a soil or aggregate through friction or mechanical interlock.

Soil Reinforcement - The synergistic improvement of a total system’s strength created by the introduction of a reinforcing geosynthetic (that is good in tension) into a soil and/or aggregate system (that is good in compression but poor in tension).

Downloads:

  • Product Description Sheet
Geogrid Used for Gravel Driveway

Geogrid Installed for Gravel Driveway

Geogrids Used For Driveway Applications

Geogrids fabrics help prevent structural failure through their ability to withstand forces in a variety of applications. Once common application is in driveway construction where utilizing a biaxial driveway geogrid can help retain the structural integrity and long term stability of the surface. One of the means by which we can evaluate a geogrid's reliability is through its junction. Junction integrity is defined by something called ultimate junction strength. We also offer a heavy duty woven separation fabric.

Ultimate junction strength – The maximum amount of force a junction can withstand before breaking.

The higher the ultimate junction strength, the better the junction integrity.

There are two main reasons why triaxial geogrids have great junction integrity:

  • Ribs cross in three directions making for thicker junctions
  • Each rib is made from a very dense polymeric material

These two features help the triaxial geogrid junctions remain intact over time.

Biaxial geogrids are geosynthetic materials formed into a grid of integrally connected tensile elements. The grid has apertures of sufficient size to allow “strike-through” and interlocking with surrounding aggregate base materials, commonly rock. Biaxial geogrid increases the stiffness of unbound aggregate base layers and confines the aggregate particles under repetitive loading.

Biaxial geogrids must be punched and drawn with polypropylene material and comply with Caltrans’ Standard Specifications for Biaxial Geogrids. The Biaxial geogrid is placed either below or within the aggregate base layer of a pavement structure. The composite section consisting of the geogrid and aggregate base is often referred to as a mechanically stabilized layer (MSL). A schematic of a typical asphalt pavement section enhanced with a biaxial geogrid is shown in Figure 1.

Geogrid is used above subgrade and below aggregate base

Cross Section of Geogrid Used for Roadway

Biaxial geogrid benefits include:

  • Reduced aggregate base thickness, which may provide immediate cost savings • Increased performance life and reliability of the pavement
  • Improved compaction and uniformity over soft or variable soils
  • Reduced hauling and heavy construction truck traffic on local roads due to relatively less materials required for removal or replacement or backfill
  • Ability to install the product in a wide range of weather conditions Prepared Subgrade Aggregate Base Biaxial Geogrid Hot Mix Asphalt 5
  • Can be used with reclaimed asphalt concrete aggregate base
  • Improved safety due to reduced construction time from reduced hauling and processing of subgrade or backfill materials
Dump Truck dumping gravel on Geogrid

Gravel Being Spread Over Grogrid

Appropriate Application Use

Biaxial geogrids are intended for asphalt or gravel (flexible) surfaces. At this time, there is no known benefit for using biaxial geogrids under concrete pavement. Biaxial geogrids can be used for a variety of project conditions, but it is most cost effective in areas where pavement surface grade and drainage control the pavement structural section. Appropriate applications include:

  • Restricted pavement surface grades due to local drainage or vertical clearance. A biaxial geogrid can provide a thinner section with performance equivalent to a pavement with a thicker aggregate base.
  • Expedited construction is required. The thinner biaxial geogrid section will result in less construction time due to less material being required. In many cases biaxial geogrid also results in less compaction effort.
  • Increased pavement structural capacity and performance life for the same thick pavement section without biaxial geogrid.
  • Soft or weak subgrades are encountered. Biaxial geogrids can reduce or eliminate the amount of materials that need to be removed.
  • Note: If you want your finished loose gravel driveway to feel like a hard surface but still drain water through use our stone glue.